STEVAL-IPE003V1: Single Phase, 140 ~ 300V, CT, SPI

This metering module can be used to build a Class 0.5 Single-phase standalone or microprocessor based meter with or without tamper detection for power line systems of V = 140 to 300Vrms, Inom / Imax = 2/20ARMS, F = 45 to 65Hz and Tamb = -40 to +85°C.

In standalone mode, a stepper motor display should be connected to pins W5 and W6. A user can select the type of stepper or the constant of output pulse frequency by changing LVS or KMOT configurators respectively.

In Microprocessor based mode, a control board with a microprocessor should be connected to the male connector P1 of the module using a 10-wire flat cable.

Features

• Single-phase, 0.5 class accuracy guaranteed
  
• Tamper detection for power line systems
  
• LED checking for:
  
• – Functioning
  
• – No Load Condition
  
• – Reverse Energy Direction
  
• Stepper Motor Display Connector
  
• Capacitive Power Supply
  
• SPI Interface Connector:
  
• – Active, Reactive Apparent Power consumption
  
• – VRMS, IRMS and Line Frequency
  
• – Status